Orlando Autobody Repair Technology Schools
Students interested in learning about autobody repair technology have a few different options near Orlando, FL. Though no schools in the area offer diploma programs, many do offer comparable certificate programs that provide training in the field. Learn about the required coursework at three colleges offering programs that prepare students to obtain industry certifications. Be sure to also take a bit of time to review a table of stats on the institutions in addition to some info on another school option.
- Located around six miles from central Orlando, Mid Florida Tech offers an automotive collision repair and refinishing certificate program. The school has an articulation agreement that allows graduates of this program to be articulated into the industrial management technology associate degree program at Valencia College.
- Students completing the automotive collision repair and refinishing program at Lake Technical Center earn certificates of completion and can be ready for careers in a year. The campus is situated roughly 36 miles from Orlando's downtown area.
- Daytona State College, located about 54 miles from downtown Orlando, offers an automotive collision repair and refinishing vocational certificate program that takes approximately 2 years to complete.
Find schools that offer these popular programs
- Aircraft Powerplant Tech
- Airframe Mechanics and Aircraft Maintenance
- Alternative Fuel Vehicle Technologies
- Autobody Repair
- Automotive Mechanics
- Avionics Repair and Maintenance
- Diesel Mechanics
- Engine Machinist
- Heavy Vehicle and Truck Tech
- Marine Watercraft Repair and Maintenance
- Motorcycle Repair and Maintenance
- Small Engine Mechanics
- Vehicle Emissions Inspection
Comparison of Schools
In addition to tuition costs, the campus environment and number of enrolled students can affect the type of college experience you have. Check out this table to find out about these and other facts for each of the profiled schools.
|Mid Florida Tech||Lake Technical Center||Daytona State College|
|School Type||2-year, public||2-year, public||4-year, primarily associate degrees, public|
|Total Enrollment (2014)||1,826*||669*||13,248*|
|Campus Setting||Large suburb||Small suburb||Small city|
|Tuition (2015-2016)||$4,774*||$4,032**||$2,961 (in-state tuition)***|
|% of First-Year Students Receiving Some Form of Financial Aid (2014)||78%*||75%*||80%*|
|Acceptance Rate (2016)||Open admissions*||Open admissions*||Open admissions*|
|Retention Rate (2013-2014)||60% of full-time*||76% of full-time*||36%*|
|Graduation Rate (of Students who Began in 2011-12)||41% overall *||70% overall *||36% overall (began in 2008)*|
Source: *NCES College Navigator, **Lake Technical Center, ***Daytona State College
Mid Florida Tech
Mid Florida Tech is an educational center that offers career-oriented programs to prepare students for employment in their chosen fields. The transportation, distribution & logistics services division offers several automotive programs, including those in diesel technology, commercial driving, automotive service technology and automotive collision repair and refinishing.
Automotive Collision Repair and Refinishing Career Certificate
This program prepares students for employment as automotive body technicians, paint and body helpers, automotive refinishers, auto collision estimators and automobile body repairers. The required 1,400 hours is divided into the following segments: paint and body helper, paint and body assistant, auto collision estimator, frame and body repairman, automotive refinishing and auto body repairer. In addition to being certified by the National Institute for Automotive Service Excellence (ASE), this program is approved by both the National Automotive Technical Education Foundation (NATEF) and I-CAR. This program qualifies students for I-CAR and ASE certifications. Possible ASE certifications include electrical and mechanical components, structural analysis and repair, non-structural analysis and repair, and collision repair and refinishing technician.
Completion of this program earns students 5 occupational completion points (OCP). When a program is made up of two or more occupational completion points, this means that the program as a whole will get students to an advanced-level career, but it's segmented so students first learn the necessary skills for one or more lower-level careers. Then, if they have finished one of the lower-level occupational completion points, they can leave school and start work in the lower-level career, without finishing the whole program.
Lake Technical School
Lake Technical School is a training institution that offers 2 campuses and more than 30 career-technical certificate programs. In addition to an automotive collision repair and refinishing program, the school also offers a 2-part automotive service technology program and a 2-part medium and heavy-duty truck and bus technician program.
Automotive Collision Repair and Refinishing Certificate of Completion
This 1,400-hour program, offered through the school's transportation, distribution and logistics department, takes approximately 47 weeks to complete. The curriculum includes hands-on training using state-of-the-art and current industry equipment. Course topics include welding, repairing unibody vehicles and frame-type vehicle bodies, estimating, painting and working with panels. Students completing this program will be qualified to take ASE and I-CAR certification exams. Applicants must take the TABE (Test of Academic Basic Education).
Daytona State College
Daytona State College is a 4-year school offering baccalaureate degree programs as well as career training to enhance the workforce and economic development.
Automotive Collision Repair and Refinishing Vocational Certificate
Daytona State College's automotive collision repair and refinishing program is offered at the Advanced Technology College. This 4-semester program requires completion of 1,116 hours of studies. The curriculum includes theory-based courses, lab classes and hands-on training through cooperative education. Course topics include electric, glass and trim, collision repair, unibody and frame, auto refinishing and advanced vehicle components. Applicants who do not have high school diplomas must take the TABE and a placement test. Graduates of this program can take ASE and I-CAR certification exams.
Other School Options
An automotive collision repair and refinishing program is also offered at Traviss Career Center, located roughly 57 miles away.