Dallas, Texas Mechanical Institutes with Degree Program Summaries

Mar 13, 2019

There are about six schools within 25 miles of Dallas, Texas, that have mechanical-related degree programs. Read an overview of two school's programs, and get statistical information about the schools to find out which one is right for you.

Mechanical Studies in Dallas, TX, Schools

Students seeking mechanical training in and near Dallas, TX, have multiple school and program choices. Mechanical studies in these schools focus primarily on areas of automotive technology, engine technology, and heating and air conditioning technology. Students can earn a certificate or 2-year degree in these fields of study.

Two of the area's larger schools offering these types of programs are highlighted here. Learn about specific degrees and certificates awarded and details about course topics in each program. Get helpful facts about these schools in the table.

  • Eastfield College is situated ten miles northeast of downtown Dallas. Its mechanical studies are in areas of automotive technology; heating, ventilation and air conditioning (HVAC); and industrial mechanics.
  • Cedar Valley College has mechanic-related courses in air conditioning, automotive technology and engine technology at the certificate and 2-year degree levels. The college is located approximately 15 miles south of Dallas' downtown area.

Comparison of Schools

No matter what area of mechanics you are intending to study, it is often beneficial to find out all that a school has to offer before selecting a program. Below you will find facts and figures reflecting each school's population, tuition, acceptance rates, and more.

Eastfield College Cedar Valley College
School Type 2-year, public 2-year, public
Total Enrollment (2017) 16,196* 7,443*
Campus Setting Large suburb Fringe rural
Tuition & Fees (2017-2018) $1,770 (in-district)*
$3,330 (in-state)*
$5,220 (out-of-state)*
$1,770 (in-district)*
$3,330 (in-state)*
$5,220 (out-of-state)*
% of First-Year Students Receiving Some Form of Financial Aid (2016-2017) 60%* 79%*
Acceptance Rate (2017) N/A-open admissions policy* N/A-open admissions policy*
Full-time Student Retention Rate (2016-2017) 59%* 54%*
Graduation Rate (students began in 2014) 16%* 19%*

Source: *NCES College Navigator.

Eastfield College

Eastfield College is one of seven schools in the Dallas County Community College District. Established in 1970 in Mesquite, northeast of Dallas, it now serves a population of more than 14,000 students with associate's degree and certificate programs in business, communications technologies, computers, education, engineering, family and consumer sciences, health, liberal arts, mechanic technologies, security services and visual arts.

Associate of Applied Science in Automotive Technology: Service Technician

The automotive technology program covers the theory, diagnosis, repair and maintenance of automobiles. It emphasizes operational theory, practical skills and accepted shop procedures to prepare students for entry-level employment as automotive technicians. Eastfield is partnered with Toyota T-TEN and Honda PACT programs. Classes include introduction to automotive technology, engine removal and installation, electrical systems, brake systems, suspension and steering systems, heating and air conditioning, drive train and axles, electronic controls and transmissions.

Residential Technician Certificate in Air Conditioning and Refrigeration Technology

This program focuses on the theory and practical challenges of installing and maintaining HVAC systems. Classes include electricity principles, A/C control principles, advanced A/C controls, refrigeration principles, commercial refrigeration, residential air conditioning, gas and electric heating, heat pumps, energy management and air conditioning systems design.

Associate's Degree and Certificate in Advanced Manufacturing/Mechatronics

The mechatronics program applies a relatively new approach to the design and manufacture of industrial products and processes that integrates mechanics, electronics and computerized controls. Mechatronics is increasingly used in robotics, automated manufacturing, cars, planes, gaming systems, vending machines, ATMs and heating and cooling systems. Certificate program courses include automated manufacturing, mechanical principals in automated manufacturing and industrial automation. Associate's degree courses include DC circuits, introduction to automated manufacturing, A/C circuits, solid state devices, electronic test equipment, industrial automation and digital systems, as well as general education topics, such as composition, algebra, natural science and social science.

Cedar Valley College

Cedar Valley College is a public community college in the Dallas County Community College District found in Lancaster, Texas. It opened in 1977 and now serves more than 6,500 students with associate's degree, certificate and continuing education programs in business, communications technology, computers, education, health, liberal arts, and the visual and performing arts.

Associate of Applied Science Degree and Certificate in Air Conditioning

The heating, air conditioning and refrigeration technology program classes take place in a lab that provides hands-on experience with everything from basic refrigeration to advanced troubleshooting. Because Cedar Valley College is a member of the Air Conditioning Contractors of America, students have opportunities to form working relationships with contractors in the North Texas region. The residential HVAC certificate includes classes in basic electricity, air conditioning control principles, refrigeration principles, gas and electric heating, residential air conditioning and heat pumps. The associate's degree features the same classes plus air conditioning installation, air conditioning systems design and air conditioning troubleshooting, as well as general education courses in composition, math, natural science, psychology and the humanities.

Associate of Applied Science Degree and Certificate in Automotive Technology

The automotive technology program provides students on-the-job training through a partnership with the New Car Dealers Association of Metropolitan Dallas. Students can earn certificates to work as chassis service technicians, electronics and climate control technicians, engine repair technicians, transmission service technicians and preventive maintenance technicians. The associate's degree includes classes in engine installation and removal, engine repair, electrical systems, brake systems, suspension and steering systems, heating and air conditioning systems, and transmissions and drive trains. Students must also take general education courses in composition, speech and the humanities.

Certificates in Engine Technology

The engine technology program offers certificates in marine technology, motorcycle technology and small engine technology. For each type of engine, classes include engine service principles, engine tune-up, electrical systems and drive systems. The motorcycle and small engine certificates also include four stroke engine and transmission systems and practica in engine repair.

Next: View Schools

Popular Schools

The listings below may include sponsored content but are popular choices among our users.

Find your perfect school

What is your highest level of education?